|
 |
| 7 October 2003 |
 |
|
Identification marks for reinforcing bars are today
required by several international standards. |
|
|
|
 |
| 7 October 2003 |
 |
|
The new ROLLWORK software for Atomat CNC machine,
is based on a revolutionary concept it integrates
the programming of the roll maintenance machines,
with a software designed to manage the roll shop
inventory. |
|
|
|
 |
| 7 March 2001 |
 |
|
A new video of AT820 E CNC notch milling machine
is now available on CD. |
|
|
|
 |
| 7 March 2001 |
 |
|
All the AT 820 E CNC notch milling machines and
AT830 E CNC combined Notching and Turning machines
can now be equipped with the Automatic Centering
Device for easy, quick and accurate groove, rib
and mark centering. |
|
|
|
|
| 23 November
2001 |
 |
|
AT 820 E CNC notch milling machine and AT830 NTE
CNC Combined Notching and Turning Machine, are now
equipped with the new RE-SY (Resuming System). In
case of power drop, black-out, emergency stop or
machine reset, the working cycle can restart from
the point when accident occurred. |
|
|
|
 |
| 16 May 2001 |
 |
|
A recent improvement in control on CNC machines
for cutting the notches in the grooves of rolls
for the production of ribbed reinforcing bar, has
resulted in a 20-30% reduction in machining time
and given the ability to notch harder WC grade roll
material. |
|
|
|
 |
| 21 February
2001 |
 |
|
Atomat has recently developed the new IMDŽ an integrated
marking device that can be installed in the new
models of the AT820 CNC mill notching machine. |
|
|
|
Copyright
© 2010 Atomat s.p.a.
Atomat s.p.a., Via Strada di Oselin 16 int.17 - 33047 REMANZACCO (UD) - Italy
Phone +39 0432 648511 - Fax +39 0432 667101 - info@atomat.com
Capitale Sociale €. 1.000.000,00 i.v. - Numero REA UD - 269801
Cod. Fisc. e N.reg. Imprese 02550190306 - Partita Iva 02550190306
Società soggetta alla direzione e coordinamento da parte di Atomat Holding S.r.l
Download
Macromedia Flash Player HERE
|
